Aqua-Hort Product Introduction
Aqua-Hort 75 mini
The Aqua-Hort 75 Midi model is for the small nursery where the pump flow is not exceeding 10-12 m3 per hour 40-50 gpm
Aqua-Hort 90
The Aqua-Hort 90 Standard model is used with a wide range of fertilizer mixers where the flow is not exceeding 30 m3 per hour 130 gpm.
Aqua-Hort Float Model
The Aqua-Hort Float Model is used where a reservoir, outdoor or indoor, exist from where water is drawn. With the big electrodes is the model suitable for low conductivity water like rain water. In outdoor reservoirs can the model solve the problems of algae. Extreme big volumes of water can be treated.
Aqua-Hort Tank Model
The Aqua-Hort Tank Model is used where big volumes of water is required, with and without fertilizers. The model is suitable for low conductivity water like rain water. In places with limited space for installation the model is suitable as the space required is limited.
Controls
33-65 amp output controls |
For the flow range of 1 to 20 m3/hour |
100-200 amp output controls |
For the flow range of 60 to 120 m3/hour |
Supplies
Electrode set Mini |
4 rods, 2 electrodes 7 kg |
Electrode set Midi |
8 rods, 4 electrodes 22 kg |
Electrode set Standard |
8 rods, 4 electrodes 33 kg |
Electrode set Plates Float |
8 plates 220-730 kg |
Electrode set Tank model |
8 plates, 3-10 mm 55-216 kg |
Merck test set |
Test for free Copper in the nutrition water |
Water-Manager
A system for the total management of condensers and cooling tower water.
It is supplied with motorised valves, flow meters and sensor for monitoring and control of water level and conductivity.